2026 New Hampshire HPIN Participation Agreement

2026 New Hampshire Heat Pump Installer Network

Powered by Eversource
Background Logic: Renewal or New
Thank you for your interest in joining the New Hampshire Heat Pump Installer Network (HPIN), powered by Eversource. This enrollment form is required to participate in the New Hampshire HPIN in 2026. Annual re-enrollment is required for all participating contractors.

Before you begin, you will need the following documents to complete enrollment:
1. Form W-9
  1. Completed and signed, either with wet signature or virtual verified signature, and dated on or after January 1, 2026
2. Active Certificate of Comprehensive General Liability Insurance
  1. Minimum $1,000,000 commercial general liability (each occurrence)
  2. Contact your insurance company to request a Certificate of Liability Insurance
  3. If your insurance company requires an address, you may list: Abode Energy Management, 555 Virginia Rd, Concord, MA 01742
3. Active NH License(s) held by an employee of your company or the subcontractor your company works with
  1. Master Electrician License required
  2. Master Plumber License required for companies installing hydronic heat pump systems
4. EPA Section 608 Certification
  1. Type II, Type III, and Universal accepted
5. Certificate of heat pump design and installation training provided by a heat pump manufacturer
Note: All businesses operating in the State of New Hampshire are required to register with the Secretary of State's office. Please check your business status here: https://quickstart.sos.nh.gov/online/BusinessInquire.
Page 1 of 12

2026 New Hampshire HPIN Participation Agreement

Please review the HPIN Participation Agreement below.
Background Logic: SF Record ID
Background Logic: Unique ID
Background Logic: Legacy HPIN Account SF ID
Background Logic: Program State
Background Logic: Force Account Creation
Background Logic: Current Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Hour MinutesAM/PM Option
Background Logic: Resubmit Form
The Participation Agreement outlines the benefits, expectations, and requirements for participating in the New Hampshire Heat Pump Installer Network (HPIN). By enrolling in the HPIN, you agree, on behalf of your company, to the terms outlined in the Participation Agreement for delivering quality heat pump installations through professional and responsible business practices.

Note: To download the Participation Agreement for easier reading, click the three dots in the upper right corner of the viewer, and Save or Print.
I certify under the penalties of law that the statements made in this Agreement, and in supporting documentation provided along with this Agreement, have been examined by me and are true and complete. I understand that by signing this Agreement, I consent to any other inquiry to verify or confirm the information I have given. I hereby authorize any reference identified or provided to the Sponsor by Participating Contractor to release to the Sponsor or Program Vendor any information pertaining to past or present relevant work. I hereby release from all liability or damage, the Sponsor, the Program Vendor, and those persons, agencies, or organizations who may furnish such information.
Participation Agreement Signature
Participation Agreement Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Printed Name
Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Page 2 of 12

New Hampshire HPIN Accountability Policy

Please review the policy below regarding expectations in terms of customer satisfaction, accountability to program standards, and program integrity.
Note: To download the Accountability Policy for easier reading, click the three dots in the upper right corner of the viewer, and Save or Print.
HPIN Accountability Policy Signature
HPIN Accountability Policy Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Page 3 of 12

Fraud and Compliance Training

Please review and agree to the fraud and compliance training below.
Fraud and Compliance Training Signature
Fraud and Compliance Training Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Page 4 of 12

New Hampshire HPIN License Agreement

The license agreement below relates to use of the HPIN logo. Participating contractors in the HPIN may, with approval, use the HPIN logo in marketing materials. All uses of the HPIN Logo must follow the Brand Guidelines and must be preapproved by Abode prior to use. Please submit a marketing approval form with a draft of the proposed materials at least 10 business days in advance of when you intend to publish/print the materials.
Contractors must be enrolled in the HPIN before using the HPIN Logo in marketing materials. The marketing approval request form is available at eversourceHPIN.com.
Note: To download the Brand Guidelines or License Agreement for easier reading, click the three dots in the upper right corner of the viewer, and Save or Print.
License Agreement
Brand Guidelines
License Agreement Signature
License Agreement Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Page 5 of 12

Quality Installation Checklist

Air source heat pump installations should be completed in accordance with the quality installation checklist below. We highly recommend bringing this checklist with you to the job site for ongoing and final installation review.
Installation Checklist Signature
Installation Checklist Date

MonthDayYear
2 digit month, 2 digit day, 4 digit yearDate
Page 6 of 12

Company Information
Please answer the next question to the best of your ability. If you have any questions, please contact NH@AbodeEnergy.com before submitting. For reference, the following options are defined as:

Heat Pump Installer (most likely)
- Company or installer who installs heat pumps and satisfies all HPIN requirements
Non-Installing General Contractor
- Company that coordinates the installation of heat pumps using subcontractors but does not perform the installation work
What best describes your participation in the Heat Pump Installer Network (HPIN)?
Are you also a participating contractor in the Mass Save®, Energize Connecticut, or Clean Heat Rhode Island programs?
As a non-installing general contractor, your participation requires the use of subcontractors. Below, please list the subcontractors you work with to install heat pump equipment or heat pump water heating equipment.
You will be required to submit appropriate licenses and certifications in the Required Documents section.
Page 7 of 12

Company Information

The following company information may be shown on the HPIN Directory on program websites. Please fill it out completely and accurately.
Company Name
Doing Business As (DBA)
ONLY complete this field if your company uses a different customer-facing name from the Company Name listed. If this DBA field is filled out, the DBA is what will be shown on the Find-A-Contractor tool.
Company Email
This should be a customer-facing email address.
Company Website
This website will be listed on the Find-A-Contractor tool. If you do not have a website, leave this field blank. Do NOT write "N/A" or "None"
Company Phone Number
Please enter a valid customer-facing phone number.Format: (000) 000-0000.
Address

Street Address (must be a physical office address, not a PO Box, to be listed on the Find-A-Contractor tool)

Street Address Line 2

CityState / Province

Postal / Zip Code
Additional Addresses (if applicable, up to 4 locations total):
Additional address may be shown on the Find-A-Contractor tool.
Address 2

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Address 3

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Address 4

Street Address

Street Address Line 2

CityState / Province

Postal / Zip Code
Page 8 of 12

Company Contact Information

The following company information is for HPIN program communications and will not be shown on the HPIN Directory.
The Primary Contact listed must monitor their inbox frequently for program announcements and communications, such as rebate inquiries and customer escalations. Fill out the following fields completely and accurately.
Primary Contact First Name
Primary Contact Last Name
Primary Contact Email
example@example.com
Primary Contact Phone Number
Please enter a valid phone number.Format: (000) 000-0000.
Primary Contact Title/Role
Add additional contact(s) for communications such as rebate inquiries and customer escalations
Secondary Contact First Name
Secondary Contact Last Name
Secondary Contact Email
example@example.com
Secondary Contact Phone Number
Please enter a valid phone number.Format: (000) 000-0000.
Secondary Contact Title/Role
Contact 3 First Name
Contact 3 Last Name
Contact 3 Email
example@example.com
Contact 3 Phone Number
Please enter a valid phone number.Format: (000) 000-0000.
Contact 3 Title/Role
Please add email addresses for additional employees you would like to have receive program information and updates, such as newsletter communications. Separate using commas.
We highly recommend listing all customer-facing contacts here to ensure that they have easy access to the latest program information.
Page 9 of 12

Required Documents
Required Documentation Checklist
1. Signed copy of this Participation Agreement
2. Form W-9
  1. Completed and signed, either with wet signature or virtual verified signature, and dated on or after January 1, 2026
3. Active Certificate of Comprehensive General Liability Insurance
  1. Minimum $1,000,000 commercial general liability (each occurrence)
  2. Contact your insurance company to request a Certificate of Liability Insurance
  3. If your insurance company requires an address, you may list: Abode Energy Management, 555 Virginia Rd, Concord, MA 01742
4. Active NH License(s) held by an employee of your company or the subcontractor your company works with
  1. Master Electrician License required
  2. Master Plumber License required for companies installing hydronic heat pump systems
5. EPA Section 608 Certification
  1. Type II, Type III, and Universal accepted
6. Certificate of heat pump design and installation training provided by a heat pump manufacturer
Note: All businesses operating in the State of New Hampshire are required to register with the Secretary of State's office. Please check your business status here: https://quickstart.sos.nh.gov/online/BusinessInquire.
I attest that each certification, license, or documentation that I am uploading to this Participation Agreement is current, valid, accurate, and in full force and effect as of the date hereof. I further acknowledge my responsibility to maintain such certifications, licenses, and documentation as current, valid, accurate, and in full force and effect continuously at all times during the term of this Participation Agreement, and to provide updated certifications, licenses, and documentation promptly to the Program Vendor as necessary to avoid any lapses in coverage or gaps in documentation. I acknowledge that failure to maintain a current and valid record of all required certifications, licenses, or documentation on file with the Program Vendor may constitute grounds for termination from the HPIN.
Please upload your W-9

W-9 must be signed and dated current year (2026)
Cancelof
Please upload your Master Electrician license (held by an employee or subcontractor)

Cancelof
Master Electrician License #
Master Electrician License Expiration Date

MonthDayYear
2 digit month, 2 digit day, 4 digit year
Please upload your Master Plumber license (held by an employee or subcontractor)

Cancelof
Master Plumber License #
Master Plumber License Expiration Date

MonthDayYear
2 digit month, 2 digit day, 4 digit year
Please upload your Certificate of Comprehensive General Liability Insurance

$1,000,000 minimum commercial general liability coverage (each occurrence); NOT worker's compensation
Cancelof
Certificate of Insurance Expiration Date

MonthDayYear
2 digit month, 2 digit day, 4 digit year
Please upload your EPA Section 608 Certification

Type II, Type III, and Universal accepted
Cancelof
Please upload your certificate of completion from an air-source heat pump design & installation training provided by a heat pump manufacturer

This should be a course specific to heat pump installation. Please contact NH@AbodeEnergy.com with any questions.
Cancelof
Date of Training

MonthDayYear
2 digit month, 2 digit day, 4 digit year
Page 12 of 12
Should be Empty:

2026 New Hampshire Heat Pump Installer Network

2026 New Hampshire HPIN Participation Agreement

New Hampshire HPIN Accountability Policy

Fraud and Compliance Training

New Hampshire HPIN License Agreement

Quality Installation Checklist

Company Information

Company Information

Company Contact Information

Company Information

Market Questionnaire

Required Documents